This is the “Motor 10.0 Rail Configuration“. The concept is that it’s to be driven by a line of ceramic, fixed stator magnets (rail gun configuration), with 4 flat magnets mounted at all quarters of the drive wheel. There are also 3 button magnets between each of the flat magnets on the wheel. I have just started playing around with this idea, but the plans are free to download. If you have any success building your own, let me know, as well as whatever changes you made to the plans, if any…
Hi Tim,
I built this design (not from your drawings) but didn’t work at all. My design was quite similar to your drawing.
The main double wheel was 18 or 20 ” or something like that. I still have the wheel with 1″ shaft
mounted with pillow block bearings.
Have you ever seen this one before? https://www.youtube.com/watch?v=mpVAQrHKXOE&t=88s
This is a Russian guy, took him many experiments to accomplish this success.
Now this one that you said you are busy with it’s interesting.
https://magmotor.org/2021/07/my-current-magnetic-motor-plans/
Did you know that that MWO transformer that you took it apart and turned into an electromagnet can even work with a single “D” cell? I made one similar to yours. But mine I put that laminate that you removed with a hinge, mounted back one side of the transformer. Turn into a sort of a solenoid.
It has amazing pul power even with a single D cell battery.
Anyway, there are many ideas to play with.
Regards,
Mehmet. (Big Island Hawaii)